Saturday, October 19, 2013

How To Configure Two Cisco Routers To Connect

Routers direct details circulation in a system. A wireless router decides the location for the details that goes into it, as well the fastest direction to that location. However, as small systems are linked together, more and more routers are needed. It is thus important to be able to link routers together.You can also read How To Backup Netgear Firmware

How To Configure Two Cisco Routers To Connect
Instructions

Connecting the Routers

1.Link the sequential wire to the Serial 0 slot of Wireless router 1 and the Serial 0 slot of Wireless router 2.

2.Link the system wire from the COM slot of the personal computer to the CON slot of Wireless router 1.

3.Turn both routers on.

4.Connect to Wireless router 1 using the "Hyper Terminal software".

Configuring Router 1

5.click "Enter" key get started.

6.Just type "enable" to get into the  "privileged exec" mode.

7.Just Type "config t" to get into the  "global configuration" mode.

8.Just type "line ser 0"; then "ip address 10.1.2.1 255.255.255.0"; then "no shutdown".

9.Just type "twice" to come back to "privileged exec" method, then type "copy run start" to preserve the settings.

Configuring Router 2

10.Detach the system wire from Wireless router 2 and link it to the CON slot of Wireless router 2.

11.Press "Enter" in the "Hyper Terminal software" to get into the wireless router, coming into any passwords necessary.

12.Just type "enable"; then "config t"; then "line ser 0" to get into the router's Sequential 0 relationship.

13.Just type "ip with 10.1.2.2 255.255.255.0", then "no shutdown".

14.Just type "end twice", then type "copy run start" to protect the settings.

Friday, October 18, 2013

How To Backup Netgear Firmware

Netgear firmware is the application run on your wi-fi router that manages its IP, firewall program and wi-fi configurations. The Netgear producer distributes up-dates for the router's firmware. Before you upgrade the router's firmware, you make a back-up. A back-up allows you to undo the changes of the upgrade process. This repairs any issues you have after you upgrade the firmware application if you unintentionally convert off the power or the upgrade is not able.You can also read How To Troubleshoot A Netgear Wireless Router


How To Backup Netgear Firmware Instructions

1.Click the Windows "Start" button and select "Internet Explorer." This open up your web browser. Get into "192.168.1.1" and press "Enter." This open up your Netgear router's administration console.

2.Simply select the "Management" menu selection. In the drop-down list of options, click "Backup/Restore Settings." This reveals the back-up window.

3.Click the "Backup" button. This reveals a discussion box with your local difficult disk directories. Choose a location on your difficult disk to save the back-up file.

4.Click "OK." It only takes a short time to create the back-up. The computer file is stored on your hard disk and only needed if your firmware upgrade is not able.

Thursday, October 17, 2013

How To Troubleshoot A Netgear Wireless Router

A Netgear Router wi-fi wireless router connects multiple gadgets to your Online access, either by ethernet cable or easily. If you can't get connected to the Online, the issue can be anywhere along the sequence of gadgets and technology that link your computer to the Online. Knowing how to repair your Netgear or other wi-fi wireless router is a valuable part of identifying where the issue is and solving it.You can also read How To Diagnose Connection Problems With A Netgear Router


Instructions

How To Troubleshoot A Netgear Wireless Router1.Just click your "Start" key, and choose "Run." Kind "cmd" in the writing box (without quote marks), and then click "OK." A control immediate will open. Kind the following: ipconfig /all. Media your "Enter" key. A list of numbers and other social media settings information will display.

2.Discover your system adaptor in this record of headers. If you use your pc easily in many different locations, you may have to search through a lot of different choices to discover your adaptor. If you get connected to the Internet using a wire, look for a headlines that starts with "Ethernet adaptor Regional Area Relationship." If you link easily, look for a headlines that starts with "Ethernet adaptor Wi-fi Relationship." You will usually only see an IP deal with shown under one headlines in either classification.

3.Record your IP deal with and standard entrance on certificates or in a text file. If your IP deal with is 0.0.0.0 or starts with 169.254, remove your Netgear wi-fi router from its energy source. Disconnect your wire or DSL device as well. Be sure to remove both devices; turning them off with a on / off change may not have the same effect. Delay 20 seconds before connecting the device in again. Delay for the lighting on the device to light up. Connect in your Netgear wi-fi wireless router again. Delay for two minutes. Use "ipconfig /all" again. You should have a different IP deal with now.

4.Called ping your standard entrance. At the control immediate, type "ping 192.168.1.1" (substituting your standard entrance deal with for 192.168.1.1). You should get four reactions, all of which will begin with either "Reply from" or "Request timed out." If you get "Request timed out," remove your Netgear wi-fi wireless router from the power resource for 20 a few moments, and connect it in again. Delay two moments before using "ping" again. If you get "Reply from" reactions, check to see if your Internet access is working again.

5.Open a Web browser. In the deal with bar, type "http://192.168.1.1" (substituting your standard entrance deal with for 192.168.1.1). Press "Enter." If you have password-protected your Netgear wireless router, you will be persuaded for a details. The standard login name for a Netgear wireless router is "admin." When you have successfully entered the details, your Web web browser will show you the settings page for your Netgear wireless wireless router.

6.Make sure all the configurations on your Netgear configurations page are correct. Most Online suppliers use a powerful IP address and DNS server details. Some Online suppliers require a sign in, and some do not. To be sure, refer to the configurations information your Online provider gave you when your Online connection was installed, or call your Online provider's tech support team number.

7.Simply just click "Wireless Settings" on the routing bar on the left-hand side of the site. If you were not able to reach the settings web page easily and had to get connected to your Netgear wireless router with an ethernet wire, create sure these configurations are still as you described them when establishing up your system. If not, either modify the configurations to match you, or modify the settings of your wi-fi card to coordinate these configurations. Be sure to select the "Apply" key if you create any changes.

8.Click "Router Status" on the routing bar on the left-hand side of the site. Under "Internet Slot," check your IP deal with. If the deal with starts with 169.254, you're not interacting with your wire or DSL device. Remove your wire or DSL device from its power source for 20 a few moments, and connect it back in. Delay two minutes, and renew this web page.
If your IP deal with still starts with 169.254, there is a issue either with the wire linking your Netgear wi-fi wireless router to your wire or DSL device, or with the device itself. If your IP deal with is 0.0.0.0, there is a issue with your Online access, and you should call your Online provider's tech support team.

9.Record all your settings details before trying to totally reset your Netgear wi-fi wireless router to the manufacturer non-payments. Resetting may fix your problem, but it will destroy all your settings details, and you will have to reconfigure your Netgear wi-fi router from the begining subsequently. To totally reset most Netgear wi-fi routers, use the tip of a pen or an unbent paperclip to media and hold the totally reset key on the back of the wi-fi router until the test light blinks. Launch the key, and delay two or three minutes. Get connected to the router's settings page in a Web web browser. Log in with the standard details, and set up your wi-fi router. You may have to link to the wi-fi router with an ethernet wire to execute this preliminary settings.


Monday, October 14, 2013

How To Diagnose Connection Problems With A Netgear Router

Netgear Router makes a complete collection of home and business Internet-networking routers. Like most Online devices, Netgear routers may occasionally experience issues that slow down or altogether restrict your Online connection. Solving these issues usually boils down to following a set of standard troubleshooting practices that clear the wireless router of potentially unclear or outdated settings. Missing any physical damage to your Netgear wireless router, you should be able to correct any connection issues with just a few mouse clicks.You can also read How To Set Up Linksys WRT54G Wireless-G High Speed Internet Router

How To Diagnose Connection Problems With A Netgear Router Instructions

Reboot the Router
1.Shut down your PC. The most common Netgear wireless router problems can be settled by simply restarting the wireless router. It is best to complete this process with your PC off so that once it's completed, your pc will set up a new connection with the wireless router when you reboot.

2.Remove the Netgear wireless router, then disconnect the Internet device.

3.Delay at least Half a minute before connecting in the Internet device.

4.Delay for the Internet device to absolutely initialize. The "Ready" mild should be strong before continuing to the next phase.

5.Connect in the Netgear wireless router.

6.Start your PC. Restarting the Netgear wireless router clears the existing configuration and allows the device and wireless router to set up a new relationship using the best settings. If successful, your pc should automatically re-establish a relationship with the Internet.

Adjust Router Settings

7.Launch your web browser. Type 192.168.1.1 in the address bar.

8.Get into "admin" as the login name and "password" as the security password to accessibility the Netgear wireless router management web page.

9.Choose "Basic Settings" and confirm that your wireless router is set up properly according to your Websites provider's (ISP) suggested configurations.

10.To restart the wireless router with the new settings, just click "Save Changes" if you create any changes

How To Set Up Linksys WRT54G Wireless-G High Speed Internet Router

The Linksys Router WRT54G is a wi-fi wireless router developed for use in an online business workplace or small-business system. The WRT54G will allow you to discuss a high-speed Internet access, via Ethernet, with up to four computers; you may also link 802.11g- and 802.11b-enabled gadgets to the wireless router via a wi-fi relationship. The product is able of wi-fi exchange prices of up to 54 Mps (802.11g), and functions WEP security, a built-in firewall program, two removable antennas and the Linksys “SpeedBooster” technological innovation, developed to enhance wi-fi system performance by up to 35 %.You can also read How To Access My Cisco Wireless Router

Instructions

1.Start installation of your Linksys Wi-fi Wireless router by first connecting in the energy. Provide it with 10 a few moments or so to initialize and then connect an ethernet wire into your walls slot and into the slot on the back again of the router noticeable Online. Next get another ethernet wire and connect one end into your laptop laptop or computer and the other into one of the slots noticeable 1-4 on the router. Your laptop or computer is now effectively linked with the router to start its installation and settings.

2.Next open a web web browser screen on the linked computer and type http://192.168.1.1 into the address bar and media get into. A screen will pop up forcing you for a details to access the settings page for your wireless router. Enter administration for both the details.

3.You should see the Installation web page shown below.


How To Set Up Linksys WRT54G Wireless-G High Speed Internet Router


 4.On this display you should change the Wireless router Name from its standard value to something unique so that your Platform Place will not be puzzled with another. Search to the end of the page and just click Save Configurations then just click Continue when the Configurations are effective discussion is shown.

5.Next, simply select the Wi-fi tab at the top of the configurations display. Modify the Wi-fi System Name (SSID) from the standard value to something exclusive (you can use the same name you set as your Wireless router Name in the past step. Then Turn off the Wi-fi SSID Transmitted choice and just click Save Settings and then Proceed when the Settings are effective discussion is shown.

6.Now simply select the Wi-fi Protection subsection at the top of the page. In order to security password secure your wireless system first use the Protection Method dropdown box to choose WEP and then from the WEP Protection dropdown box choose 128 pieces 26 hex numbers. Choose a security password between 6 and 8 figures and type it into the Passphrase box. Then just click Produce. Lastly just click Save Configurations and then Continue when the Configurations are effective discussion is shown. You may also choose WPA security, however not all system credit cards support this, so check your certification first.

7.Next simply choose the Wi-fi MAC Narrow subsection at the top of the page. Then Allow the Wi-fi MAC Narrow choice and choose the choice to Permit only PCs detailed to access the wireless network. Select the Save Configurations key at the bottom of the Narrow List window and then Continue.

8.Now simply select the Modify MAC Narrow Record key to pop up a new screen (shown below) where you will get into the MAC Deal with, also known as Physical Deal with, for each computer that you will be using to get connected to your wi-fi system. If you don't know how to get this information follow the actions here. Once you have completed, simply select the Save Configurations key at the end of the Narrow Record screen and then Continue when the Configurations are effective discussion is proven. You may now close the Mac Deal with Narrow Record screen.

9.Lastly simply select the Management tab at the top of the page. Change the standard security password for obtaining your wi-fi wireless router installation webpages by writing a new one into the Router Password area and then verifying it. This should be a different security password than the one you installation for WEP security, but should also be at least 6 to 8 figures long. Click the Save Configurations key at the end of the Narrow List screen and then Continue when the Configurations are effective discussion is shown.

10.If you experienced any problems during this settings process, please seek advice from the guide that was involved with your wireless router or get in touch with the maker.Your Linksys Wi-fi Wireless router is now protected.

Saturday, October 12, 2013

How To Access My Cisco Wireless Router

Cisco Wireless Router has two lines of wi-fi routers: Linksys and 'cisco' Valet. Both are used in home systems and for obtaining the Online from computer systems with wi-fi plugs. The installation and settings is different for these two manufacturers. You can use a Web internet browser to get connected to a Linksys wi-fi wireless router. 'Cisco' Valet wireless routers use an Easy Setup Key, which you connect into a USB slot of your pc to set up 'Cisco' Link software. After a personal computer has been set up to access either wireless router the first time, linking to the Online is simply a matter of starting a Web internet browser.You can also read How To Set Up A New Linksys E1000 Router Without The CD

How To Access My Cisco Wireless RouterInstructions

Accessing a Cisco Linksys Router

1.Make sure that your 'cisco' Linksys wireless wireless router is connected to power and turned on.

2.Turn on your computer. Click on the "Network" symbol in the notice area at the end of the Microsoft Windows 7 desktop computer.

3.Identify your 'cisco' Linksys wi-fi router located under "Wireless Network Relationship."

4.Get into a protection password if required. This is the protection password you joined when establishing the router's protection configurations.

5.Open a Web internet browser and go to any page on the Internet to validate you have access your 'cisco' Linksys wi-fi wireless router.

6.Type "http://192.168.1.1/" in the address area of your Web web browser at any time to access the management board of your 'cisco' Linksys wireless router.

Accessing a Cisco Valet Router

7.Follow steps 1 to 3 in the previous area if you have already installed 'cisco' Get connected to your pc and have previously utilized your 'cisco' Valet wireless wireless router from your pc. If this is the first time linking to the wireless router, continue to the step 2.

8.Place the Easy Installation Key that came with your 'cisco' Valet wi-fi wireless router into a USB slot in your laptop or computer. A pop-up display seems to be on your display.

9.Select "Connect to Your 'cisco' Valet." The 'cisco' Link installation expert releases.

10.Do as instructed provided, which include how to turn on and set up your 'cisco' Valet wi-fi wireless router and how to link it to the Internet. When the set up has finished, a Best wishes display seems to be. Simply click "OK," and securely eliminate the Easy Installation Key.

Thursday, October 10, 2013

How To Set Up A New Linksys E1000 Router Without The CD

'Cisco' implemented the Linksys line of wi-fi routers in 2003. Linksys wi-fi routers are designed for both business and home customers, with such features as power management and address filtration. The E1000 Linksys wi-fi router provides the ability to get connected to a network through either a wired or wi-fi relationship, increasing the range for discussing an Internet access.You can also read How To Set Up Cisco Routers


How To Set Up A New Linksys E1000 Router Without The CD
 Instructions

1.Link the Ethernet wire provided with the wireless router to the "1" slot on your wireless router. Link the other end to the Ethernet slot on your PC.

2.Open your computer's Web internet browser and visit "192.168.1.1" with the internet browser. Press Enter.

3.Log into the wireless router at the immediate by coming into "admin" in the Security password area. Leave the login name area empty.

4.Get into your ISP's details in the site that seems to be, using their specific areas.

5.Simply select the choice to "Obtain an IP deal with instantly." You normally do need to get into an IP deal with, standard entrance or subnet cover up personally, unless you have asked for a fixed IP from your company. In that situation, select the "Specify an IP address" choice and get into the information your ISP gives you into the appropriate areas.